Hero Background Slide 1

IMMI Go

Go Light. Go Simple. Go Safe.

Go Light. Go Simple. Go Safe.
Go Light. Go Simple. Go Safe.
Go Light. Go Simple. Go Safe.

Go Light. Go Simple. Go Safe.

A popular choice of Uber Family, the IMMI Go is portable, lightweight (only 10 lbs!), takes up little room, and is perfect for parents on the move. It even fits in the overhead bin on a plane. Whether you’re traveling in the big city, going on vacation, or simply heading to the store, the IMMI Go is quick to install and easy to use for safety-minded parents.

IMMI Go Features

5-Point Harness
1

5-Point Harness

5-point child harness restraint
Shoulder Height Adjusters
2

Shoulder Height Adjusters

To custom fit each child
Chest clip
3

Chest clip

For additional securement
Mini-connector and Top Tether
4

Mini-connector and Top Tether

For fast, easy, and safe installation
Booster Seat
5

Booster Seat

Converts to a booster seat
1

5-Point Harness

5-point child harness restraint
5-Point Harness
2

Shoulder Height Adjusters

To custom fit each child
Shoulder Height Adjusters
3

Chest clip

For additional securement
Chest clip
4

Mini-connector and Top Tether

For fast, easy, and safe installation
Mini-connector and Top Tether
5

Booster Seat

Converts to a booster seat
Booster Seat

Safety Benefits

  • Designed and tested for children:
    • Height: 31″ – 52″
    • Weight: 22 – 55 lbs. (using LATCH),
    • 22-65 lbs. (using vehicle seat belts)
  • Significantly lighter for parents and grandparents to carry than traditional car seats.
  • Portable and quick to install so parents are more likely to protect their children in cab rides and ride shares.
  • Uber uses the IMMI Go for their Uber Family option in numerous cities, offering parents the added protection of a child restraint for their children.
  • Extensively crash tested at CAPE to meet or exceed all applicable safety standards.

IMMI Go

Go light, simple, and safe with the IMMI Go portable child restraint.

Buy IMMI GO

Purchase IMMI GO today.

IMMI GO FAQs

The following is a list of common questions about the IMMI Go Child Restraint. If you have additional questions, please email customer service or call 877-447-2305.

A: The IMMI Go is a portable child restraint system for use in passenger vehicles. It has a built-in 5-point harness for children needing to be secured in a forward-facing mode. The harness can be removed so that the IMMI Go can also be used as a backless booster seat for older children using the vehicle belts. When not in use, the IMMI Go folds compactly into itself for easy carrying or storage.

A: The IMMI Go is designed for occasional needs of a forward facing child restraint such as in ride shares or taxis, trips with relatives and friends, or long distance vacations so you can have your own child restraint available at your destination. Public agencies needing the occasional child restraint will appreciate the ability to store the IMMI Go in their trunk without losing much space.

A: When the IMMI Go using the internal harness system is installed using the lower LATCH anchors for attachment, the child must weigh 22 – 55 pounds (10.1 – 24.9 kg); or using the vehicle seat belts for lower attachment, the child must weigh 22 – 65 pounds (10.1 – 29.5 kg). Height of the child must be 31 – 52 inches (78.7 – 132.1 cm). Also the child must be a minimum of one year of age, however, caregivers should follow NHTSA best practice child seat recommendation: Children under age 1 should always ride in rear facing car seats; and children 1 – 3 years of age should ride in rear-facing car seats as long as possible and until they reach the upper height or weight limit according to the manufacturers’ instructions. A child must be a minimum one year of age and 22 lbs. to use the IMMI Go child restraint. Check your state laws for applicable usage minimums.

A: When converted to the booster mode, limits for the child size become 40 – 100 pounds (18.1 – 45.4 kg) and a height of 43 – 57 inches (110.1 – 144.8 cm). The top of child’s ears are below top of vehicle seat cushion or vehicle headrest.

A: The IMMI Go was designed and certified to FMVSS 213 for use in the United States. It is not approved for use in Canada and other countries including Europe which have ECE requirements for child seats.

A: The IMMI Go is 16.5 inches at its widest (across the arm rests), and 9.5 inches where it meets the back of the vehicle seat. It is 13.5″ deep.

A: Just 10 pounds!

A: Your car must have a tether anchor to install the IMMI Go child restraint. In addition, the lower portion of the Go requires attachment either with the lower LATCH anchors or the vehicle seat belt. Check out our resource videos here on how to install the IMMI Go using LATCH. You can install the seat using the seat belt path, but you still need a top tether anchor. Consult your vehicle’s owner’s manual to find out which seat positions you can install the IMMI GO in your car.

A: No, since airplane seats do not have tether anchors (for 5-point harness mode) or shoulder belts (for booster mode). However, it does fit perfectly into the overhead bin of the plane just like a piece of carry-on luggage.

A: Yes, and it is free! It is attached to the seat for easy travel.

A: The IMMI Go restraint only comes in black pleather with attractive yellow stitching trim.

A: The IMMI Go restraint can only be purchased on-line at immigoseat.com.

A: CPST’s are eligible for a discount on the IMMI Go child restraint. Please contact our shipping distributor at orders@immigoseat.com for further details.You will need your CPST/CPSTi number to obtain the discount.

A: Please contact our shipping distributor at orders@immigoseat.com to find out more about expedited shipping options.

A: The IMMI Go child restraint system is considered to have a finite life. It must be frequently inspected and replaced as needed. The service life of a Go is six (6) years from the date of manufacture. The date of manufacture can be found on the label located on the bottom of the restraint base.